Death Save D20

This is a Raw, unpolished 3D Printed Mold Master removed from Supports. They do not require any additional curing or coatings for use with platinum cure silicones. We utilize Form 3B printers with photopolymer resin (our standard is opaque blue). For custom ideas, or additional dice to be created, message us first, and we will gladly walk you through the best way to purchase and design your ideas.

They are 3D printed tools and not intended for gameplay. They are used for first sanding and polishing; then making molds and casting your own handmade dice. . Rounded Dice, or other alternate shapes can be purchased through the Custom Shop. Additional dice for your set can be purchased as separate items here in the webstore.

• Prints will have a matte or cloudy appearance when printed, but after sanding and polishing can produce a glass-like finish

• Prints will have a few raised edges, termed "rails", to protect the masters from any edge distortion during printing and ensure minimal divots in the faces of the dice during support removal.

• All of our font offerings are 100% free for commercial use. No need to worry about font licensing or copyright, if you want something with a custom font, don't hesitate to message us or get on our custom Shop waitlist.

• Each die is scaled proportionally based off of a 20mm D20, face-to-face measurement and our standard numbering depth is 1mm and usually sands down to 0.8-0.9mm. If you need some dice of a different size send us a message or hop onto our customs list.

Every purchase from our shop grants you access to the exclusive "Arcanaclass: Support and Chill" discord where dozens of pro dice artists and mold-makers hang out to help get your first pulls, or troubleshoot your existing process. Even attend zoom classes for pouring techniques, mold-making, marketing, logo design. Ask for a link after checkout!!

There's no better way to help our shop than by leaving a review!!